HERCULES SERIAL SERIAL
HERCULES SERIAL SOFTWARE
HERCULES SERIAL FREE
HERCULES SERIAL MAC

Security can be greatly enhanced by setting a fixed address or a suitable restrictive mask that disallow communication with unauthorized parties.(IP requesting access AND N ) = WIf this condition is valid, you can access the device (AND is binary multiplication). IP Filter MASKN: Mask (0.0.0.0 allows all)This mask restricts addresses that can communicate with the device. More details to the IP Filter you can find in the deviceвЂќs manuals, include examples and counting formulas. This value must result from multiplying the remote IP address and the restriction mask (option N), otherwise the device does not react. IP Filter Address RangeW: Address (0.0.0.0 allows all)IP address of a network or computer that is allowed to communicate with the device. GatewayThe IP address of the PC, router or switch interface, etc., with which the device is directly connected. It must be the same for all the devices in the network segment. Module IP maskThe Subnet Mask in this case 255.255.255.0. For the Connect with TCP Client button to work it has to be set to 23 (Telnet). PortThis field displays the port the device (operating as server) listens to.

HERCULES SERIAL MAC

Module IPThis field displays the IP value of the respective device which has the MAC address highlighted in the Modules MAC list.

HERCULES SERIAL SERIAL

Parameters :Search for the devices over UDP broadcastList of all devices on the network segment (MAC list)Check and assign main network parameters (IP address, IP mask ans Gateway)Change main communication IP portDefine IP filter range (useful for the security reasons) Special parametersTEA authorisation enable (useful for the security reasons)NVT enable (for the remote serial port devices)TCP Setup mode enable (port 99) 3x quick button (TCP Setup, TCP data communication, WWW Browser) In this window you can assign the IP address to compatible devices ( PortBox, PortStore, PortStore2, I/O Controller, Charon 1 module, Poseidon etc.) UDP Config This tab is to be used with /wiki devices only.

HERCULES SERIAL FREE

The Hercules SETUP is compatible with our free Virtual Serial Port, you can debug applications connected to remote serial port using Windows 2000 or higher. UDP Config utility (IP, Port, MASK, GW setting) Test mode (TCP/IP terminal with TEA authorization support and NVT (Network virtual Terminal) parser for remote I/O pins control. Serial port terminal (COM5 and higher support) TCP/IP Client terminal (similar to вЂњTelnetвЂќ) TCP/IP Server вЂњterminalвЂќ UDP вЂњterminalвЂќ Hercules is great utility if you are working with the serial and Ethernet devices & interfaces. Technical Information Technical Information

HERCULES SERIAL SOFTWARE

Using Telnet extended with NVT allows serial port configuration (RFC2217), device identification, confirmation of data sequence, etc.ItвЂќs FREEWARE you can use and share this software free You can check and control all serial port lines (CTS, RTS, DTR, DSR, RI, CD)Simple TCP client (like the Hyperterminal) with the TEA support, view format, file transfers, macros.Easy to use TCP Server with the TEA support, view format, file transfers, macros.Hercules contains simple UDP/IP вЂњTerminalвЂќ with view formats, echo, file transfers, macros.Support the NVT (Network Virtual Terminal) in the Test mode tab, as like as NVT debuging features. EXE file)Implemented Serial Port Terminal is working with the Virtual Serial Ports (COM12 for example). It was created for HW group internal use only, but today itвЂќs includes many functions in one utility and itвЂќs Freeware! With our original devices (Serial/Ethernet Converter, RS-232/Ethernet Buffer or I/O Controller) it can be used for the UDP Config.Д¬omplete support for Windows 7, 8, 8.1 and 10All basic TCP and UDP utilities in one file, no installation required (just one. Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal), UDP/IP terminal and TCP/IP Client Server terminal.

Hercules serial